Forklift Lever Hand Brake

The operating object of the hand brake device is the hand brake lever, and its control method varies according to the form of installation I. At the bottom left of the dashboard, pull the hand to the top with your hand to brake; when you relax, pull it slightly to the top and rotate at a certain angle at the same time, push the hand lever to the bottom, that is, to lift the brake. The brake lever on the bottom plate of the cab. The operation method is to put the four fingers together, the tiger's mouth up, and the thumb. 

 Press the button at the top of the rod and pull the handle back, that is, the brake. When relaxing, first pull the rod back slightly, then press the button at the top of the rod with your thumb, and then push the rod forward to the end. That is, remove the brake. Cable winch hand brake. When using it, you need to repeatedly pull the handle with your hand several times until you feel tight, that is, it plays the braking effect. The relaxation method is the same as that of ordinary hand braking. If you can't press the button during the relaxation process, you can step on the foot brake to promote relaxation and lightness. Pedal hand brake, when you use it, you can step on the pedal with your foot to brake. When relaxing, press the hand brake button installed under the dashboard with your hand. The braking effect is to remove. In general, it is forbidden to use the hand brake to slow down the car, and you can't tighten the hand brake before the car stops. In case of emergency, foot brake and hand brake are used together to enhance the braking effect.